, ist aus dem raspi Projekt.
Ich einen LM 317 im TO-92 Gehäuse mit 2 * 470Ohm beschaltet und ~2,54V d...
// add the 7 Segment LED
// pin 12 is connected to the DataIn
// pin 11 is connected to the CLK
// pin 10 is connected to LOAD
// only one MAX72xx Chip
// LedControl(dataPin,clockPin,csPi
=
DS18S20
* Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
* ±0.5°C Accuracy from -10°C to +85°C
* <fc #800000>9-Bit</fc> Resolution
DS18B20
* Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
* ±0.5°C Accuracy from
ilabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers ).
----
==== Firmware ... ..
Auto-detected Flash size: 4MB
Flash params set to 0x0040
Compressed 438272 bytes to 284139...
Wrote 438272 bytes (284139 compressed) at 0x00000000 in 2... n.
Right click on it and select -> Properties.
Go to Compatibility tab.
Check Override high DPI scalin
...._____....._____....._____
/dev/ttyUSB0 failed to connect: Failed to connect to Espressif device: Invalid head of packet (0x08)
</code>
Beim Flaschen über die rechte Tas... er schreiben mit "esptool.py --chip esp32 -p <USB-to-Serial Port> write_flash -z 0x1000 <path to .bin>
er schreiben mit "esptool.py --chip esp32 -p <USB-to-Serial Port> write_flash -z 0x1000 <path to .bin>"
<code cmd>
C:\Python38\python.exe .\esptool.py ... onfiguring flash size...
Compressed 1448768 bytes to 926007...
Wrote 1448768 bytes (926007 compressed)... "help()" for more information.
>>> help()
Welcome to MicroPython on the ESP32!
..
</code>
Testprogr
lemented with AT826
print('-- try to get Feature Report')
for freport ... uffer)
# May be must be 1 ?? to trigger the send process of the api???
... s.stdout)
# else:
# # python3, you have to deal with encodings, try redirecting to any file
# output = sys.stdout
# try:
# hid.
tp://www.digitalsmarties.net/|JeeLabs]]).
* USB to Serial Adapter bzw. Kabel aus der Bastelkiste
So... t/ds/symlink/lp2950-n.pdf|LP 2950]] ACZ3,3 in der TO-92 Bauform.
Die erste Schaltung frei nach dem [[