Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- dba:rac_add_second_ip [2013/12/17 10:24] – [Umsetzung] gpipperr
+++ dba:rac_add_second_ip [2013/12/17 11:55] – gpipperr
@@ Zeile 43: / Zeile 43: @@
 |Host 1 |racdb01|192.162.178.220|
 |Host 2 |racdb01|192.162.178.222|
-|PL Lan Host 1  |racdb01-PL|192.162.183.220|
+|PL Lan Host 1  |racdb01-GPI|192.162.183.220|
 |PL  Lan Host 2  |racdb02-PL|192.162.183.222|
-|VIP PL  Lan Host 1  |racdb01-pl-vip |192.162.183.224|
+|VIP PL  Lan Host 1  |racdb01-GPI-vip |192.162.183.224|
-|VIP PL Lan Host 2  |racdb02-pl-vip |192.162.183.226|
+|VIP PL Lan Host 2  |racdb02-GPI-vip |192.162.183.226|
@@ Zeile 63: / Zeile 63: @@
 <code bash>
-nslookup  racdb02-pl-vip
+nslookup  racdb01-GPI-vip
-nslookup  racdb02-pl-vip
+nslookup  racdb02-GPI-vip
-nslookup  racdb02-pl
+nslookup  racdb02-GPI
-nslookup  racdb02-pl
+nslookup  racdb01-GPI
 </code>
@@ Zeile 147: / Zeile 147: @@
 DEVICE=eth5
 BOOTPROTO=none
+HWADDR="<MAC ADDRESS>"
+NM_CONTROLLED="no
+TYPE="Ethernet"
+PEERDNS=no
 ONBOOT=yes
 MASTER=ibond3
@@ Zeile 158: / Zeile 162: @@
 DEVICE=eth6
 BOOTPROTO=none
+HWADDR="<MAC ADDRESS>"
+NM_CONTROLLED="no
+TYPE="Ethernet"
+PEERDNS=no
 ONBOOT=yes
 MASTER=ibond3
@@ Zeile 173: / Zeile 181: @@
 <code bash>
-# be carefully with the default gateway entry if this is not the default
+#add Bonding Interface
+/etc/modprobe.d/bonding.conf:
+alias bond3 bonding
+# be carefully no default gateway!
+# Gateway set with routing rules
 vi ifcfg-ibond3
 DEVICE=ibond3
-IPADDR=192.162.183.220
+TYPE="Ethernet"
+IPADDR=192.162.183.224
 NETMASK=255.255.255.0
-GATEWAY=192.162.183.1
 ONBOOT=yes
 NM_CONTROLLED=no
+PEERDNS=no
 BOOTPROTO=none
-BONDING_OPTS="mode=1"
+BONDING_OPTS="mode=1 miimon=1000"
+# Define Routing Polices
+/etc/iproute2/rt_tables:
+plvlan
+/etc/sysconfig/network-scripts/route-bond3:
+default via 192.162.183.254 dev bond3 table plvlan
+/etc/sysconfig/network-scripts/rule-bond3:
+from 192.162.183.224 lookup plvlan
+from 192.162.183.226 lookup plvlan
+from all to 192.162.183.220 lookup plvlan
+from all to 192.162.183.224 lookup plvlan
 </code>
@@ Zeile 194: / Zeile 232: @@
 ifconfig bond3 up
+# alternativ
+ifup bond3
 </code>
@@ Zeile 243: / Zeile 283: @@
 <code bash>
-ping racdb01-pl
+ping racdb01-GPI
 ping racdb02-pl
@@ Zeile 340: / Zeile 380: @@
 #add entry local listner listener_net2_racdb01_pl
-listener_net2_racdb01_pl=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=racdb01-pl-vip)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=192.162.183.224)(PORT=1521)(IP=FIRST))))
+listener_net2_racdb01_pl=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=racdb01-GPI-vip)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=192.162.183.224)(PORT=1521)(IP=FIRST))))
 #add entry local listner listener_net2_racdb02_pl
-listener_net2_racdb02_pl=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=racdb02-pl-vip)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=192.162.183.226)(PORT=1521)(IP=FIRST))))
+listener_net2_racdb02_pl=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=racdb02-GPI-vip)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=192.162.183.226)(PORT=1521)(IP=FIRST))))