o use
RPIO.setmode(RPIO.BCM)
# OUT - Enable Port for the module
enable_port=27
RPIO.setup(enable_port,... o use
RPIO.setmode(RPIO.BCM)
# OUT - Enable Port for the module
enable_port = 27
RPIO.setup(enable_por... check = sum(value_list)
pdebug("-- Parity Check for {0} : Sum {1} : Parity Bit {2}".format(data_word_... ime
sleeptime = time.time() - seconds
# check for the 59s - full 100 reads low
# + the minimal lo
aus:
<code bash>
fdisk /dev/mmcblk1
Command (m for help): p
Disk /dev/mmcblk1: 57.7 GiB, 61891149824... 3 Linux
</code>
Löschen:
<code bash>
Command (m for help): d
Partition number (1-3, default 3): 3
Pa... Signatur nicht zu löschen:
<code bash>
Command (m for help): n
Partition type
p primary (2 primary, 0 extended, 2 free)
e extended (container for logical partitions)
Select (default p): p
Partiti
PIO.HIGH)
# Now we can start measurement
for clock in range(8):
time.sleep(clock_time)... erenzvoltage> -r <runs> "
sys.exit(2)
for opt, arg in opts:
if opt == '-h':
... ad the values and get the average value as result
for clock in range(v_runs):
# set the CS Line to ... rmat(v_avg / float(v_runs))
#Set a defined Value for the next start
RPIO.output(cs_port, RPIO.HIGH)
RP
des Images Oracle Linux 9.2 64-bit Arm (aarch64) for use with RPi 4 and RPi 3 von https://www.oracle.c... release-el9.aarch64
#etwas warten! sonst Waiting for process with pid 4049 to finish!
dnf install ora... aus:
<code bash>
fdisk /dev/mmcblk0
Command (m for help): p
Disk /dev/mmcblk0: 28.82 GiB, 309413806
rt=27
RPIO.setup(out_port,RPIO.OUT)
#Frist Blink
for i in range(0,10):
#set the out port to HI... Thread will do the interrupt handling)
RPIO.wait_for_interrupts(threaded=True)
#Do something others
w... ddessen etwas anders tun kann, ist bei "RPIO.wait_for_interrupts(threaded=True)" das "threaded=True" ge
0 1945599 911360 83 Linux
Command (m for help): d
Partition number (1,2, default 2): 2
Partition 2 is deleted
Command (m for help): n
Partition type:
p primary (1 prima... 122880-124735487, default 124735487):
Command (m for help): w
The partition table has been altered!
#-
mongodb.org/display/DOCS/File+Based+Configuration for format details
# Run mongod --help to see a list ... log_failure_msg "could not access PID file for $name";
return $status;
else
2 - TXD|
|Pin 1 - VCC|
\___________|
1.8V LVTTL for ODROID-U3/XU3/XU4/X2/X
3.3V LVTTL for ODROID-C1/C1+/C0/C2/W
RxD pin is input and TxD pin is output.
ql>
su - postgres
psql
psql (9.3.4)
Type "help" for help.
postgres=# CREATE USER powerdns WITH PASSW... fehler "psql: FATAL: Ident authentication failed for user "powerdns""
vi /var/lib/pgsql/data/pg_hba.co
+/DMB-Radio optimised Kino 3 baseband chip. Ideal for WorldDMB Profile 1 receivers, providing superior ... eption at low-power and at a price point suitable for entry level products.
Siehe => http://www.fronti