e/fachabteilungen/abt4/fb-44/ag-442/dissemination-of-legal-time/dcf77.html|Zeitzeichensender DCF77]] i... DCF-Signal am Maximum ist
* Enable auf GND bzw. offen => Modul ist aktiviert
Anschluss - Übersicht... ng gut klappt.
Bei einer ersten Messung fallen sofort alle LED Lampen in der Nähe negativ auf, ist d... setzen und damit den Beginn einer jeden Sekunde sofort erkennen
Im ersten Test habe ich eine Lösung
Package Funktionalität von Debian von der Unifi Software für das AutoUpdate verwendet wird.
Ablauf ... nstallieren
Ablauf Ubiquiti UniFi Controller
* Software im RPM und im Debian Format organisieren
* Software im RPM Format installieren
* Scripte und L... _raspian /sbin/nmon
</code>
----
==== Unifi Software installieren ====
===Unfi User ===
<code b
rhalten muss der exakte Wert gemessen und in der Software berücksichtigt werden! Leider ändert dieser ... dienen als Vref für den Pin 5 und werden in der Software als Referenzwert verwendet.
Besser geeignet... et the bits
# set a bit to 1
def setBit(int_type, offset):
mask = 1 << offset
return (int_type | mask)
# set a bit to 0
def clearBit(int_type, o
en DOS Header etc. loss zu werden
dd if=/dev/zero of=/dev/sda bs=1M count=8
8+0 records in
8+0 records... ion und Tools installieren<code bash>
pacman -S lsof
pacman -S wget
pacman -Syu
# testen ob es geklapp... cht geklappt! Das dann über einen zweiten Rechner offline (nicht gemounted!) durchgeführt!
* Falls... ing
<code>
#speed test
# INTENSO
dd if=/dev/zero of=/data/testSpeedFile bs=1M count=2024
..
212231782
installieren/
----
==== Display am PI ====
The official Raspberry Pi touch display
* https://ww... ensor-acs712
----
=== Temperatur messen ===
Software:
* digitemp https://www.digitemp.com/
<... measurements
* Operating temperature range of -55°C to +125°C
* accurate to ±0.5°C over the range of -10°C to +85°C.
* Programmable Resolution 1-W
2016/08/16**
=== Vorbereitung ===
Testen ob die Software "raspistill" bereits vorhanden ist
=== Ins... lation ===
- System stoppen <code bash>
poweroff
</code>
- Spannungsversorgung abschalten
- ... %H")
PARAM=backlight
#set the mode over the hour of the day
if [ ${MY_HOUR} -lt 7 ]
then
PARAM=night... tab aufrufen
#
crontab -e
# Minute Hour Day of Month Month Day of Week Com
rd}}
Der Sensor ansich funktioniert ohne jede Software, wird die Platine mit Spannung versorgt, sta... dtparam=i2c_arm=on
</code>
==Notwendige Basis Software installieren==
Ich setze hier auf [[raspber...
yum install c++
#Here is pidora in use, script of this library is use debian style
#Manually instal... -c arduPi.cpp -o arduPi.o
#Complie the minimal software:
g++ -lrt -lpthread geiger.cpp arduPi.o -o
die Admin Gruppe erlauben
%adm ALL = NETWORKING, SOFTWARE, SERVICES, STORAGE, DELEGATING, PROCESSES, L... 891149824 bytes, 120881152 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical... 1, default 120881151):
Created a new partition 3 of type 'Linux' and of size 57.3 GiB.
Partition #3 contains a btrfs signature.
Do you want to remove th
//picru.st/
<note important>In Arbeit</note>
Software Media Player:
* https://volumio.org/project/
Im ersten Schritt eine Stoffsammlung
==== Radio Chip Auswahl ====
===DAB/DAB... a FS2052 module is the latest in a new generation of digital audio products to use the new DAB/DAB+/DM... imised Kino 3 baseband chip. Ideal for WorldDMB Profile 1 receivers, providing superior signal recepti
#set the out port to LOW again
# LED OFF
RPIO.output(out_port,RPIO.LOW)
R... _id, callback, edge='both', pull_up_down=RPIO.PUD_OFF, threaded_callback=False, debounce_timeout_ms=No... back=SetLed, edge='rising', pull_up_down=RPIO.PUD_OFF, debounce_timeout_ms=25)
# Non Blocking wait (
Eine PostgreSQL Datenbank einrichten ===
== DB Software installieren==
<code bash>
yum install post... kontrollieren:
pdns=# \d
List of relations
Schema | Name | Typ